No products in the cart.
Seamlessly Shipping all over Pakistan.
Original price was: ₨ 12,000.₨ 8,000Current price is: ₨ 8,000.
Lightweight PLA (PLA-LW) is a special foaming 3D printing filament designed for ultra-light models like RC planes, drones, and cosplay parts. It expands during printing, reducing weight by up to 50% while maintaining excellent surface finish.
Key Features:
Your orders are shipped seamlessly between cities
You can return your orders within 5 days.
Your payments are free & secure with us.
Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the Light weight pla filament enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.
Density as low as 0.54g/cm3
Foaming volume ratio 220%
Free adjustment of strength and foaming ratio
Excellent matte surface effect
Good interlayer adhesion
Easy to paint
Excellent printability
1. Note that the first layer speed setting is consistent with the actual printing speed, set to 100% of the actual printing speed, turn off the first layer and small area printing speed reduction function, the first layer extrusion rate is consistent with the actual foaming extrusion rate, such as 270 degrees set to 45% of the first layer extrusion rate; if the bed adhesion is too strong, you can set the bottom valve when printing.
2. Pay attention to the maximum operating temperature of the printer. Most Teflon tube printers cannot be operated for a long time above 250℃. Long-term printing above this temperature may cause blocking. If the temperature exceeds 250℃, high temperature printers such as metal hoses are required for printing.
3. Yellowing of printed parts after high temperature foaming is a normal phenomenon. Lowering the printing temperature can relieve it.
4. Since the PLA-LW foams continuously in the melting cavity of the high-temperature nozzle, the retraction basically does not work. Stringing is normal during printing. It is recommended to print the rc plane in vase mode to reduce the effect of stringing.
5. Foaming ratio is related to temperature, printing speed, nozzle melting cavity size, pay attention to compare model design wall thickness according to your own printing situation, adjust extrusion rate, temperature, speed and other parameters.
| Density(g/cm3) | 1.2 |
| Melt Flow Index | 8.1(190℃/2.16kg) |
| Heat Distortion Temp(℃,0.45MPa) | 42 5/10 |
| Tensile Strength(MPa) (XY) | 11.39 |
| Tensile Strength(MPa)(Z) | 1.74 |
| Elongation at Break(%)(XY) | 4.02 |
| Elongation at Break(%)(Z) | 1.52 |
| Flexural Strength(MPa)(XY) | 20.4 |
| Flexural Strength(MPa)(Z) | 3 |
| Flexural Modulus(MPa)(XY) | 964.07 |
| Flexural Modulus(MPa)(Z) | 206.83 |
| IZOD Impact Strength(kJ/㎡)(XY) | 5.49 |
| IZOD Impact Strength(kJ/㎡)(Z) | 0.73 |
| Extruder Temperature(℃) | 190-270℃ |
| Bed temperature(℃) | 45-60℃ |
| Fan Speed(％) | 100% |
| Printing Speed(mm/S) | 60-200mm/s |
| Heated Bed | Need |
| Printing Suggestions | Turn off pullback and do not print multiple models together |
At Sky Heights, we specialize in innovative 3D printing solutions and high-quality accessories. Our mission is to bring your ideas to life with precision and creativity, offering cutting-edge technology for a wide range of applications. Whether you’re a hobbyist or a professional, Sky Heights has the tools and expertise to elevate your projects to new heights.
Reviews
There are no reviews yet.